https://forum.scale-monitor.com/ Mon, 24 Aug 2026 03:54:51 +0000 MyBB https://forum.scale-monitor.com/showthread.php?tid=4 Fri, 29 Nov 2024 15:16:57 +0100 Denis_Fajertag@ScaleMonitor]]> https://forum.scale-monitor.com/showthread.php?tid=4 1. Visit https://apps.scale-monitor.com
2. click on CSL-Bluetooth->Quick configuration
3. Connect via Bluetooth by selecting CloudScaleLink module from list of avaliable devices and enter CSL (PIN) of module
4. Enter WIFI name and password.
5. Save button and after that reboot in order to apply new configuration.

CloudScaleLink shall connect to your WIFI.

You can see full procedure on Youtube: https://www.youtube.com/watch?v=J1osKKzhaB4

NOTE: if you are using iPhone or iPad please install Bluefy browser from App store and visit  https://apps.scale-monitor.com in Bluefy browser.]]> 1. Visit https://apps.scale-monitor.com
2. click on CSL-Bluetooth->Quick configuration
3. Connect via Bluetooth by selecting CloudScaleLink module from list of avaliable devices and enter CSL (PIN) of module
4. Enter WIFI name and password.
5. Save button and after that reboot in order to apply new configuration.

CloudScaleLink shall connect to your WIFI.

You can see full procedure on Youtube: https://www.youtube.com/watch?v=J1osKKzhaB4

NOTE: if you are using iPhone or iPad please install Bluefy browser from App store and visit  https://apps.scale-monitor.com in Bluefy browser.]]> https://forum.scale-monitor.com/showthread.php?tid=3 Thu, 21 Nov 2024 19:42:58 +0100 Denis_Fajertag@ScaleMonitor]]> https://forum.scale-monitor.com/showthread.php?tid=3 First character name of the module: O - Odin (WIFI/Bluetooth), T - Thor (Ethernet version), Z - Zeus, etc.

Next two characters are for connection type:
GP stands for General purpose - this module comes without any cables so you have to solder them by yourself (RX-receive, TX-trasmit, GND-ground and +Vin/-Vin)
LE stands for Loose end - this means you get four cables that needs to be connected  (RX-receive, TX-trasmit, GND-ground and +Vin)
HF stands for Housing Female - this means you get DB9 RS-232 cable with female connector
HF stands for Housing male - this means you get DB9 RS-232 cable with male DB9 connector]]> First character name of the module: O - Odin (WIFI/Bluetooth), T - Thor (Ethernet version), Z - Zeus, etc.

Next two characters are for connection type:
GP stands for General purpose - this module comes without any cables so you have to solder them by yourself (RX-receive, TX-trasmit, GND-ground and +Vin/-Vin)
LE stands for Loose end - this means you get four cables that needs to be connected  (RX-receive, TX-trasmit, GND-ground and +Vin)
HF stands for Housing Female - this means you get DB9 RS-232 cable with female connector
HF stands for Housing male - this means you get DB9 RS-232 cable with male DB9 connector]]> https://forum.scale-monitor.com/showthread.php?tid=2 Sun, 09 Jun 2024 11:38:12 +0200 Denis_Fajertag@ScaleMonitor]]> https://forum.scale-monitor.com/showthread.php?tid=2 I am looking for ATEX precision scale manufacturer that is capable of producing scales with electromagnetic load cell for Ex zone. We would need capacity like 6,2 kg with readout d 0,01 g or capacity 35 kg and readout 0,1 g. Scales would need to be suitable for zone 2GD and 3GD.

We know Mettler Toledo, Minebea/Sartorius, Radwag, Dini Argeo/Rice lake etc. but I wonder, if out there is maybe also some other alternative?]]> I am looking for ATEX precision scale manufacturer that is capable of producing scales with electromagnetic load cell for Ex zone. We would need capacity like 6,2 kg with readout d 0,01 g or capacity 35 kg and readout 0,1 g. Scales would need to be suitable for zone 2GD and 3GD.

We know Mettler Toledo, Minebea/Sartorius, Radwag, Dini Argeo/Rice lake etc. but I wonder, if out there is maybe also some other alternative?]]>